for communication instead of TCP. This allows you to forward the
connection over ssh in a secure maner. Though you can forward TCP
sessions over ssh, it doesn't implement authentication, so ANYONE
on the box could end up accessing the disks. With socks you can use
file system permissions to restrict them.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Runtime services require special execution environment for the call.
Besides that, OS must inform firmware about runtime virtual memory map
which will be active during the calls, with the SetVirtualAddressMap()
runtime call, done while the 1:1 mapping is still used. There are two
complication: the SetVirtualAddressMap() effectively must be done from
loader, which needs to know kernel address map in advance. More,
despite not explicitely mentioned in the specification, both 1:1 and
the map passed to SetVirtualAddressMap() must be active during the
SetVirtualAddressMap() call. Second, there are buggy BIOSes which
require both mappings active during runtime calls as well, most likely
because they fail to identify all relocations to perform.
On amd64, we can get rid of both problems by providing 1:1 mapping for
the duration of runtime calls, by temprorary remapping user addresses.
As result, we avoid the need for loader to know about future kernel
address map, and avoid bugs in BIOSes. Typically BIOS only maps
something in low 4G. If not runtime bugs, we would take advantage of
the DMAP, as previous versions of this patch did.
Similar but more complicated trick can be used even for i386 and 32bit
runtime, if and when the EFI boot on i386 is supported. We would need
a trampoline page, since potentially whole 4G of VA would be switched
on calls, instead of only userspace portion on amd64.
Context switches are disabled for the duration of the call, FPU access
is granted, and interrupts are not disabled. The later is possible
because kernel is mapped during calls.
To test, the sysctl mib debug.efi_time is provided, setting it to 1
makes one call to EFI get_time() runtime service, on success the efitm
structure is printed to the control terminal. Load efirt.ko, or add
EFIRT option to the kernel config, to enable code.
Discussed with: emaste, imp
Tested by: emaste (mac, qemu)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
gmultipath.8: Add HISTORY
Adjust sentences with bad phrases picked up by igor
ggatec.8: Add HISTORY
ggated.8: Add HISTORY
ggatel.8: Add HISTORY
Seperate out sentence as advised by igor.
hastctl.8: Add HISTORY
hastd.8: Add HISTORY
Fix sentence highlighted by igor.
iscontrol.8: Add HISTORY
mdmfs.8: Add HISTORY
Address issues raised by igor
mount_nfs.8: Add HISTORY
Not sure where mount_nfs first showed up, but the verison used
in the BSD's originates from 4.4BSD according to CSRG archive.
Though commercial offerings from Sun and others covers older
systems, eg https://groups.google.com/forum/#!topic/net.unix-wizards/lMe7aQikqJI
nandfs.8: Add HISTORY
Adjust sentence in description to address bad phrase highlighted
by igor.
nvmecontrol.8: Add HISTORY
PR: 212491
PR: 212498
PR: 212499
PR: 212500
PR: 212501
PR: 212502
PR: 212505
PR: 212508
PR: 212540
PR: 212543
PR: 212546
Submitted by: Sevan Janiyan <venture37@geeklan.co.uk>
this on the branch.
Original commit message:
Initial bhyve native graphics support.
This adds emulations for a raw framebuffer device, PS2 keyboard/mouse,
XHCI USB controller and a USB tablet.
A simple VNC server is provided for keyboard/mouse input, and graphics
output.
A VGA emulation is included, but is currently disconnected until an
additional bhyve change to block out VGA memory is committed.
Credits:
- raw framebuffer, VNC server, XHCI controller, USB bus/device emulation
and UEFI f/w support by Leon Dang
- VGA, console/g, initial VNC server by tychon@
- PS2 keyboard/mouse jointly done by tychon@ and Leon Dang
- hypervisor framebuffer mem support by neel@
Tested by: Michael Dexter, in a number of revisions of this code.
With the appropriate UEFI image, FreeBSD, Windows and Linux guests can
installed and run in graphics mode using the UEFI/GOP framebuffer.
Approved by: re (gjb)
Add pidfile support to ggated(8)
The tests will manipulate the system daemon today, which can cause undesired
service interruption when the tests are run.
This change allows the geom_gate tests to be run with an arbitrary ggated(8)
daemon / geom_gate(4) device pairing.
Other changes:
- Sort #includes
- Use a more common idiom for parsing options with getopt(3)
The tests will manipulate the system daemon today, which can cause undesired
service interruption when the tests are run.
This change allows the geom_gate tests to be run with an arbitrary ggated(8)
daemon / geom_gate(4) device pairing.
Other changes:
- Sort #includes
- Use a more common idiom for parsing options with getopt(3)
Differential Revision: https://reviews.freebsd.org/D4836
MFC after: 2 weeks
Reviewed by: bjk (manpages), pjd (maintainer timeout)
Sponsored by: EMC / Isilon Storage Division
tools/regression/geom_{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
in to the FreeBSD test suite as
tests/sys/geom/class/{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
The tools/regression/geom and tools/regression/geom_part testcases are being
left alone because both test sets are both currently broken.
The majority of this work was done on ^/user/ngie/more-tests2 . The differences
are as follows:
- tests/sys/geom/class/Makefile.inc is not present; it was
inlined into the class's Makefiles for explicitness.
- The testcases officially require root via kyua
- The geom_gate(4) tests don't use the pidfile changes proposed in
https://reviews.freebsd.org/D4836 .
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
If ggated's exports_find() fails, the connection is removed before
(trying to) report the problem to the client.
sendfail() is called with an already closed socket and thus it
fails to inform the client about the problem.
Fix this by calling sendfail() before connection_remove().
PR: 195944
Submitted by: Fabian Keil
Reviewed by: pjd
Approved by: re (gjb)
Unbreak ggatec and ggatel on i386 after r238119, which added two more
'struct g_gate_ctl_create' fields.
While the behaviour was technically undefined on other architectures
as well, on the reporter's amd64 systems the uninitialized bytes the
kernel cares about were always zero so everything worked as expected.
PR: 197309, 199559
Submitted by: ota@j.email.ne.jp, Fabian Keil
Reviewed by: pjd
Approved by: re (gjb)
'struct g_gate_ctl_create' fields.
While the behaviour was technically undefined on other architectures
as well, on the reporter's amd64 systems the uninitialized bytes the
kernel cares about were always zero so everything worked as expected.
PR: 197309, 199559
Submitted by: ota@j.email.ne.jp, Fabian Keil
Reviewed by: pjd
MFC after: 1 week
(trying to) report the problem to the client.
sendfail() is called with an already closed socket and thus it
fails to inform the client about the problem.
Fix this by calling sendfail() before connection_remove().
PR: 195944
Submitted by: Fabian Keil
Reviewed by: pjd
MFC after: 1 week
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
- ggatel.8 currently doesn't mention the 'rescue' command and
documents a non-existing 'attach' command instead.
- while here address a spelling error
Approved by: wblock (mentor)
Differential Revision: https://reviews.freebsd.org/D2346
John-Mark Gurney
emaste
pfg
bdrewery
ngie
kib
allanjude
ak
grehan
brueffer
sjg
jgh
wblock
bapt