TODO
====

Support auto creating missing VLANs with names from a table.


Compatability
=============

NetGear GS724TS
---------------

V5.2.0.11

Cannot create VLANs
Cannot set Egress/Untagged for VLAN 1
May have an issue w/ adding and removing a port from egress/untagged in the same command.

Can set VLAN names

SNMPv3 does not support 3DES or AES encryption.
Supported: authProtocol=usmHMACSHAAuthProtocol, privProtocol=usmDESPrivProtocol


NetGear GS724Tv4
----------------

V6.3.1.4

Fixed user of admin.  Auth key is the same as web admin password.

SNMPv3 does not support 3DES or AES encryption.
Supported: authProtocol=usmHMACSHAAuthProtocol, privProtocol=usmDESPrivProtocol

If you modify the egress ports, it will automatically ALSO set the bits for
untagged (despite them being "correct" before).  Currently, you have to run the
tool a second time to set the untagged config properly.

NetGear GS510TLP
----------------

V6.6.2.8

Fixed user of admin.  Auth key is the same as web admin password.

SNMPv3 does not support 3DES or AES encryption.
Supported: authProtocol=usmHMACSHAAuthProtocol, privProtocol=usmDESPrivProtocol

If you modify the egress ports, it will automatically ALSO set the bits for
untagged (despite them being "correct" before).  Currently, you have to run the
tool a second time to set the untagged config properly.