TODO
====

Support auto creating missing VLANs with names from a table.


Compatability
=============

NetGear GS724TS
---------------

V5.2.0.11

Cannot create VLANs
Cannot set Egress/Untagged for VLAN 1
May have an issue w/ adding and removing a port from egress/untagged in the same command.

Can set VLAN names

SNMPv3 does not support 3DES or AES encryption.
Supported: authProtocol=usmHMACSHAAuthProtocol, privProtocol=usmDESPrivProtocol


NetGear GS724Tv4
----------------

### V6.3.1.4

Fixed user of admin.  Auth key is the same as web admin password.

SNMPv3 does not support 3DES or AES encryption.
Supported: authProtocol=usmHMACSHAAuthProtocol, privProtocol=usmDESPrivProtocol

If you modify the egress ports, it will automatically ALSO set the bits for
untagged (despite them being "correct" before).  Currently, you have to run the
tool a second time to set the untagged config properly.

### V6.3.1.19

Does not list VLANs in dot1qVlanStatus, must use dot1qVlanStaticName or
dot1qVlanCreationTime to get list of VLANs.

NetGear GS510TLP
----------------

V6.6.2.8

Fixed user of admin.  Auth key is the same as web admin password.

SNMPv3 does not support 3DES or AES encryption.
Supported: authProtocol=usmHMACSHAAuthProtocol, privProtocol=usmDESPrivProtocol

If you modify the egress ports, it will automatically ALSO set the bits for
untagged (despite them being "correct" before).  Currently, you have to run the
tool a second time to set the untagged config properly.

NetGear GS108Tv2
----------------

Does not list VLAN 1 under dot1qVlanStaticName.

It appears that firmware v5.4.2.30 will not set a port to be untagged
via SNMP.  If after configuring via SNMP, a UI visit appears to be
required, toggle the setting and hit apply.

NetGear GS724TPv2
-----------------

Requires firmware version of at least v1.1.50.39 for SNMPv3 to be
functional.  This version of firmware also requires a timeout of 2
seconds, which is longer than the 1 second default for queries to
complete.  An issue with net-snmp has been filed:
https://github.com/net-snmp/net-snmp/issues/194

This swich cannot create vlans with the state set to createAndGo, they
must use createAndWait, set the egress ports (even if they are all
empty), before the vlan may be set active.