stm32lib/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h

/**
  ******************************************************************************
  * @file    stm32f0xx_hal_uart_ex.h
  * @author  MCD Application Team
  * @brief   Header file of UART HAL Extended module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_UART_EX_H
#define __STM32F0xx_HAL_UART_EX_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"

/** @addtogroup STM32F0xx_HAL_Driver
  * @{
  */

/** @addtogroup UARTEx
  * @{
  */

/* Exported types ------------------------------------------------------------*/
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
  * @{
  */

/**
  * @brief  UART wake up from stop mode parameters
  */
typedef struct
{
  uint32_t WakeUpEvent;        /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
                                    This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
                                    If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
                                    be filled up. */

  uint16_t AddressLength;      /*!< Specifies whether the address is 4 or 7-bit long.
                                    This parameter can be a value of @ref UART_WakeUp_Address_Length.  */

  uint8_t Address;             /*!< UART/USART node address (7-bit long max). */
} UART_WakeUpTypeDef;

/**
  * @}
  */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */

/* Exported constants --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
  * @{
  */

/** @defgroup UARTEx_Word_Length UARTEx Word Length
  * @{
  */
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
    defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_WORDLENGTH_7B                  ((uint32_t)USART_CR1_M1)   /*!< 7-bit long UART frame */
#define UART_WORDLENGTH_8B                  (0x00000000U)              /*!< 8-bit long UART frame */
#define UART_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M0)   /*!< 9-bit long UART frame */
#else
#define UART_WORDLENGTH_8B                  (0x00000000U)              /*!< 8-bit long UART frame */
#define UART_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M)    /*!< 9-bit long UART frame */
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
          defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
  * @}
  */

/** @defgroup UARTEx_AutoBaud_Rate_Mode    UARTEx Advanced Feature AutoBaud Rate Mode
  * @{
  */
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
    defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT    (0x00000000U)                     /*!< Auto Baud rate detection on start bit            */
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)   /*!< Auto Baud rate detection on falling edge         */
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME   ((uint32_t)USART_CR2_ABRMODE_1)   /*!< Auto Baud rate detection on 0x7F frame detection */
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME   ((uint32_t)USART_CR2_ABRMODE)     /*!< Auto Baud rate detection on 0x55 frame detection */
#else
#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT    (0x00000000U)                     /*!< Auto Baud rate detection on start bit            */
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)   /*!< Auto Baud rate detection on falling edge         */
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
          defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
  * @}
  */

#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
/** @defgroup UARTEx_LIN    UARTEx Local Interconnection Network mode
  * @{
  */
#define UART_LIN_DISABLE                    (0x00000000U)                          /*!< Local Interconnect Network disable */
#define UART_LIN_ENABLE                     ((uint32_t)USART_CR2_LINEN)            /*!< Local Interconnect Network enable  */
/**
  * @}
  */

/** @defgroup UARTEx_LIN_Break_Detection  UARTEx LIN Break Detection
  * @{
  */
#define UART_LINBREAKDETECTLENGTH_10B       (0x00000000U)                         /*!< LIN 10-bit break detection length */
#define UART_LINBREAKDETECTLENGTH_11B       ((uint32_t)USART_CR2_LBDL)            /*!< LIN 11-bit break detection length  */
/**
  * @}
  */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */

/** @defgroup UART_Flags     UARTEx Status Flags
  *        Elements values convention: 0xXXXX
  *           - 0xXXXX  : Flag mask in the ISR register
  * @{
  */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_FLAG_REACK                     (0x00400000U)              /*!< UART receive enable acknowledge flag      */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
#define UART_FLAG_TEACK                     (0x00200000U)              /*!< UART transmit enable acknowledge flag     */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_FLAG_WUF                       (0x00100000U)              /*!< UART wake-up from stop mode flag          */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
#define UART_FLAG_RWU                       (0x00080000U)              /*!< UART receiver wake-up from mute mode flag */
#define UART_FLAG_SBKF                      (0x00040000U)              /*!< UART send break flag                      */
#define UART_FLAG_CMF                       (0x00020000U)              /*!< UART character match flag                 */
#define UART_FLAG_BUSY                      (0x00010000U)              /*!< UART busy flag                            */
#define UART_FLAG_ABRF                      (0x00008000U)              /*!< UART auto Baud rate flag                  */
#define UART_FLAG_ABRE                      (0x00004000U)              /*!< UART auto Baud rate error                 */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_FLAG_EOBF                      (0x00001000U)              /*!< UART end of block flag                    */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
#define UART_FLAG_RTOF                      (0x00000800U)              /*!< UART receiver timeout flag                */
#define UART_FLAG_CTS                       (0x00000400U)              /*!< UART clear to send flag                   */
#define UART_FLAG_CTSIF                     (0x00000200U)              /*!< UART clear to send interrupt flag         */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_FLAG_LBDF                      (0x00000100U)              /*!< UART LIN break detection flag (not available on F030xx devices)*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
#define UART_FLAG_TXE                       (0x00000080U)              /*!< UART transmit data register empty         */
#define UART_FLAG_TC                        (0x00000040U)              /*!< UART transmission complete                */
#define UART_FLAG_RXNE                      (0x00000020U)              /*!< UART read data register not empty         */
#define UART_FLAG_IDLE                      (0x00000010U)              /*!< UART idle flag                            */
#define UART_FLAG_ORE                       (0x00000008U)              /*!< UART overrun error                        */
#define UART_FLAG_NE                        (0x00000004U)              /*!< UART noise error                          */
#define UART_FLAG_FE                        (0x00000002U)              /*!< UART frame error                          */
#define UART_FLAG_PE                        (0x00000001U)              /*!< UART parity error                         */
/**
  * @}
  */

/** @defgroup UART_Interrupt_definition   UARTEx Interrupts Definition
  *        Elements values convention: 000ZZZZZ0XXYYYYYb
  *           - YYYYY  : Interrupt source position in the XX register (5bits)
  *           - XX  : Interrupt source register (2bits)
  *                 - 01: CR1 register
  *                 - 10: CR2 register
  *                 - 11: CR3 register
  *           - ZZZZZ  : Flag position in the ISR register(5bits)
  * @{
  */
#define UART_IT_PE                          (0x0028U)                  /*!< UART parity error interruption                 */
#define UART_IT_TXE                         (0x0727U)                  /*!< UART transmit data register empty interruption */
#define UART_IT_TC                          (0x0626U)                  /*!< UART transmission complete interruption        */
#define UART_IT_RXNE                        (0x0525U)                  /*!< UART read data register not empty interruption */
#define UART_IT_IDLE                        (0x0424U)                  /*!< UART idle interruption                         */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_IT_LBD                         (0x0846U)                  /*!< UART LIN break detection interruption          */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
#define UART_IT_CTS                         (0x096AU)                  /*!< UART CTS interruption                          */
#define UART_IT_CM                          (0x112EU)                  /*!< UART character match interruption              */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_IT_WUF                         (0x1476U)                  /*!< UART wake-up from stop mode interruption       */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
/**
  * @}
  */


/** @defgroup UART_IT_CLEAR_Flags  UARTEx Interruption Clear Flags
  * @{
  */
#define UART_CLEAR_PEF                       USART_ICR_PECF            /*!< Parity Error Clear Flag           */
#define UART_CLEAR_FEF                       USART_ICR_FECF            /*!< Framing Error Clear Flag          */
#define UART_CLEAR_NEF                       USART_ICR_NCF             /*!< Noise detected Clear Flag         */
#define UART_CLEAR_OREF                      USART_ICR_ORECF           /*!< Overrun Error Clear Flag          */
#define UART_CLEAR_IDLEF                     USART_ICR_IDLECF          /*!< IDLE line detected Clear Flag     */
#define UART_CLEAR_TCF                       USART_ICR_TCCF            /*!< Transmission Complete Clear Flag  */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_CLEAR_LBDF                      USART_ICR_LBDCF           /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
#define UART_CLEAR_CTSF                      USART_ICR_CTSCF           /*!< CTS Interrupt Clear Flag          */
#define UART_CLEAR_RTOF                      USART_ICR_RTOCF           /*!< Receiver Time Out Clear Flag      */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_CLEAR_EOBF                      USART_ICR_EOBCF           /*!< End Of Block Clear Flag           */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
#define UART_CLEAR_CMF                       USART_ICR_CMCF            /*!< Character Match Clear Flag        */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_CLEAR_WUF                       USART_ICR_WUCF            /*!< Wake Up from stop mode Clear Flag */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
/**
  * @}
  */

/** @defgroup UART_Request_Parameters UARTEx Request Parameters
  * @{
  */
#define UART_AUTOBAUD_REQUEST               ((uint32_t)USART_RQR_ABRRQ)        /*!< Auto-Baud Rate Request      */
#define UART_SENDBREAK_REQUEST              ((uint32_t)USART_RQR_SBKRQ)        /*!< Send Break Request          */
#define UART_MUTE_MODE_REQUEST              ((uint32_t)USART_RQR_MMRQ)         /*!< Mute Mode Request           */
#define UART_RXDATA_FLUSH_REQUEST           ((uint32_t)USART_RQR_RXFRQ)        /*!< Receive Data flush Request  */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define UART_TXDATA_FLUSH_REQUEST           ((uint32_t)USART_RQR_TXFRQ)        /*!< Transmit data flush Request */
#else
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */
/**
  * @}
  */

#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB)  && !defined(STM32F030xC)
/** @defgroup UART_Stop_Mode_Enable   UARTEx Advanced Feature Stop Mode Enable
  * @{
  */
#define UART_ADVFEATURE_STOPMODE_DISABLE    (0x00000000U)                       /*!< UART stop mode disable */
#define UART_ADVFEATURE_STOPMODE_ENABLE     ((uint32_t)USART_CR1_UESM)          /*!< UART stop mode enable  */
/**
  * @}
  */

/** @defgroup UART_WakeUp_from_Stop_Selection   UART WakeUp From Stop Selection
  * @{
  */
#define UART_WAKEUP_ON_ADDRESS              (0x00000000U)                       /*!< UART wake-up on address                         */
#define UART_WAKEUP_ON_STARTBIT             ((uint32_t)USART_CR3_WUS_1)         /*!< UART wake-up on start bit                       */
#define UART_WAKEUP_ON_READDATA_NONEMPTY    ((uint32_t)USART_CR3_WUS)           /*!< UART wake-up on receive data register not empty */
/**
  * @}
  */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */

/**
  * @}
  */

/* Exported macros ------------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros
  * @{
  */

/** @brief  Flush the UART Data registers.
  * @param  __HANDLE__ specifies the UART Handle.
  * @retval None
  */
#if !defined(STM32F030x6) && !defined(STM32F030x8)
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__)  \
  do{                \
      SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \
      SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \
    }  while(0)
#else
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__)  \
  do{                \
      SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \
    }  while(0)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/** @defgroup UARTEx_Private_Macros UARTEx Private Macros
  * @{
  */

/** @brief  Report the UART clock source.
  * @param  __HANDLE__ specifies the UART Handle.
  * @param  __CLOCKSOURCE__ output variable.
  * @retval UART clocking source, written in __CLOCKSOURCE__.
  */
#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__)       \
  do {                                                        \
     switch(__HAL_RCC_GET_USART1_SOURCE())                    \
     {                                                        \
      case RCC_USART1CLKSOURCE_PCLK1:                         \
        (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;           \
        break;                                                \
      case RCC_USART1CLKSOURCE_HSI:                           \
        (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;             \
        break;                                                \
      case RCC_USART1CLKSOURCE_SYSCLK:                        \
        (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;          \
        break;                                                \
      case RCC_USART1CLKSOURCE_LSE:                           \
        (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;             \
        break;                                                \
      default:                                                \
        (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;       \
        break;                                                \
     }                                                        \
  } while(0)
#elif defined (STM32F030x8) || defined (STM32F070x6) ||       \
      defined (STM32F042x6) || defined (STM32F048xx) ||       \
      defined (STM32F051x8) || defined (STM32F058xx)
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
  do {                                                        \
    if((__HANDLE__)->Instance == USART1)                      \
    {                                                         \
       switch(__HAL_RCC_GET_USART1_SOURCE())                  \
       {                                                      \
        case RCC_USART1CLKSOURCE_PCLK1:                       \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
          break;                                              \
        case RCC_USART1CLKSOURCE_HSI:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
          break;                                              \
        case RCC_USART1CLKSOURCE_SYSCLK:                      \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
          break;                                              \
        case RCC_USART1CLKSOURCE_LSE:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
          break;                                              \
        default:                                              \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;     \
          break;                                              \
       }                                                      \
    }                                                         \
    else if((__HANDLE__)->Instance == USART2)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else                                                      \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;         \
    }                                                         \
  } while(0)
#elif defined(STM32F070xB)
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
  do {                                                        \
    if((__HANDLE__)->Instance == USART1)                      \
    {                                                         \
       switch(__HAL_RCC_GET_USART1_SOURCE())                  \
       {                                                      \
        case RCC_USART1CLKSOURCE_PCLK1:                       \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
          break;                                              \
        case RCC_USART1CLKSOURCE_HSI:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
          break;                                              \
        case RCC_USART1CLKSOURCE_SYSCLK:                      \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
          break;                                              \
        case RCC_USART1CLKSOURCE_LSE:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
          break;                                              \
        default:                                              \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;     \
          break;                                              \
       }                                                      \
    }                                                         \
    else if((__HANDLE__)->Instance == USART2)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART3)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART4)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else                                                      \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;         \
    }                                                         \
  } while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
  do {                                                        \
    if((__HANDLE__)->Instance == USART1)                      \
    {                                                         \
       switch(__HAL_RCC_GET_USART1_SOURCE())                  \
       {                                                      \
        case RCC_USART1CLKSOURCE_PCLK1:                       \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
          break;                                              \
        case RCC_USART1CLKSOURCE_HSI:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
          break;                                              \
        case RCC_USART1CLKSOURCE_SYSCLK:                      \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
          break;                                              \
        case RCC_USART1CLKSOURCE_LSE:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
          break;                                              \
        default:                                              \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;     \
          break;                                              \
       }                                                      \
    }                                                         \
    else if((__HANDLE__)->Instance == USART2)                 \
    {                                                         \
       switch(__HAL_RCC_GET_USART2_SOURCE())                  \
       {                                                      \
        case RCC_USART2CLKSOURCE_PCLK1:                       \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
          break;                                              \
        case RCC_USART2CLKSOURCE_HSI:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
          break;                                              \
        case RCC_USART2CLKSOURCE_SYSCLK:                      \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
          break;                                              \
        case RCC_USART2CLKSOURCE_LSE:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
          break;                                              \
        default:                                              \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;     \
          break;                                              \
       }                                                      \
    }                                                         \
    else if((__HANDLE__)->Instance == USART3)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART4)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else                                                      \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;         \
    }                                                         \
  } while(0)
#elif defined(STM32F091xC) || defined (STM32F098xx)
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
  do {                                                        \
    if((__HANDLE__)->Instance == USART1)                      \
    {                                                         \
       switch(__HAL_RCC_GET_USART1_SOURCE())                  \
       {                                                      \
        case RCC_USART1CLKSOURCE_PCLK1:                       \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
          break;                                              \
        case RCC_USART1CLKSOURCE_HSI:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
          break;                                              \
        case RCC_USART1CLKSOURCE_SYSCLK:                      \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
          break;                                              \
        case RCC_USART1CLKSOURCE_LSE:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
          break;                                              \
        default:                                              \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;     \
          break;                                              \
       }                                                      \
    }                                                         \
    else if((__HANDLE__)->Instance == USART2)                 \
    {                                                         \
       switch(__HAL_RCC_GET_USART2_SOURCE())                  \
       {                                                      \
        case RCC_USART2CLKSOURCE_PCLK1:                       \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
          break;                                              \
        case RCC_USART2CLKSOURCE_HSI:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
          break;                                              \
        case RCC_USART2CLKSOURCE_SYSCLK:                      \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
          break;                                              \
        case RCC_USART2CLKSOURCE_LSE:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
          break;                                              \
        default:                                              \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;     \
          break;                                              \
       }                                                      \
    }                                                         \
    else if((__HANDLE__)->Instance == USART3)                 \
    {                                                         \
       switch(__HAL_RCC_GET_USART3_SOURCE())                  \
       {                                                      \
        case RCC_USART3CLKSOURCE_PCLK1:                       \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
          break;                                              \
        case RCC_USART3CLKSOURCE_HSI:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
          break;                                              \
        case RCC_USART3CLKSOURCE_SYSCLK:                      \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
          break;                                              \
        case RCC_USART3CLKSOURCE_LSE:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
          break;                                              \
        default:                                              \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;     \
          break;                                              \
       }                                                      \
    }                                                         \
    else if((__HANDLE__)->Instance == USART4)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART5)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART6)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART7)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART8)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else                                                      \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;         \
    }                                                         \
  } while(0)
#elif defined(STM32F030xC)
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
  do {                                                        \
    if((__HANDLE__)->Instance == USART1)                      \
    {                                                         \
       switch(__HAL_RCC_GET_USART1_SOURCE())                  \
       {                                                      \
        case RCC_USART1CLKSOURCE_PCLK1:                       \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
          break;                                              \
        case RCC_USART1CLKSOURCE_HSI:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
          break;                                              \
        case RCC_USART1CLKSOURCE_SYSCLK:                      \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
          break;                                              \
        case RCC_USART1CLKSOURCE_LSE:                         \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
          break;                                              \
        default:                                              \
          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;     \
          break;                                              \
       }                                                      \
    }                                                         \
    else if((__HANDLE__)->Instance == USART2)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART3)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART4)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART5)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else if((__HANDLE__)->Instance == USART6)                 \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;             \
    }                                                         \
    else                                                      \
    {                                                         \
      (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED;         \
    }                                                         \
  } while(0)

#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */


/** @brief  Compute the UART mask to apply to retrieve the received data
  *         according to the word length and to the parity bits activation.
  * @note   If PCE = 1, the parity bit is not included in the data extracted
  *         by the reception API().
  *         This masking operation is not carried out in the case of
  *         DMA transfers.
  * @param  __HANDLE__ specifies the UART Handle.
  * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field.
  */
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
    defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_MASK_COMPUTATION(__HANDLE__)                             \
  do {                                                                \
  if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B)            \
  {                                                                   \
     if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE)               \
     {                                                                \
        (__HANDLE__)->Mask = 0x01FFU;                                 \
     }                                                                \
     else                                                             \
     {                                                                \
        (__HANDLE__)->Mask = 0x00FFU;                                 \
     }                                                                \
  }                                                                   \
  else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B)       \
  {                                                                   \
     if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE)               \
     {                                                                \
        (__HANDLE__)->Mask = 0x00FFU;                                 \
     }                                                                \
     else                                                             \
     {                                                                \
        (__HANDLE__)->Mask = 0x007FU;                                 \
     }                                                                \
  }                                                                   \
  else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B)       \
  {                                                                   \
     if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE)               \
     {                                                                \
        (__HANDLE__)->Mask = 0x007FU;                                 \
     }                                                                \
     else                                                             \
     {                                                                \
        (__HANDLE__)->Mask = 0x003FU;                                 \
     }                                                                \
  }                                                                   \
} while(0)
#else
#define UART_MASK_COMPUTATION(__HANDLE__)                             \
  do {                                                                \
  if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B)            \
  {                                                                   \
     if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE)               \
     {                                                                \
        (__HANDLE__)->Mask = 0x01FFU;                                 \
     }                                                                \
     else                                                             \
     {                                                                \
        (__HANDLE__)->Mask = 0x00FFU;                                 \
     }                                                                \
  }                                                                   \
  else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B)       \
  {                                                                   \
     if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE)               \
     {                                                                \
        (__HANDLE__)->Mask = 0x00FFU;                                 \
     }                                                                \
     else                                                             \
     {                                                                \
        (__HANDLE__)->Mask = 0x007FU;                                 \
     }                                                                \
  }                                                                   \
} while(0)
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
          defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)  */

/**
  * @brief Ensure that UART frame length is valid.
  * @param __LENGTH__ UART frame length.
  * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
  */
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
    defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
                                         ((__LENGTH__) == UART_WORDLENGTH_8B) || \
                                         ((__LENGTH__) == UART_WORDLENGTH_9B))
#else
#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \
                                         ((__LENGTH__) == UART_WORDLENGTH_9B))
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
          defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */

/**
  * @brief Ensure that UART auto Baud rate detection mode is valid.
  * @param __MODE__ UART auto Baud rate detection mode.
  * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
  */
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
    defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__)  (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT)    || \
                                                        ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
                                                        ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME)   || \
                                                        ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
#else
#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__)  (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT)    || \
                                                        ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
          defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */


#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
/**
  * @brief Ensure that UART LIN state is valid.
  * @param __LIN__ UART LIN state.
  * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid)
  */
#define IS_UART_LIN(__LIN__)        (((__LIN__) == UART_LIN_DISABLE) || \
                                     ((__LIN__) == UART_LIN_ENABLE))

/**
  * @brief Ensure that UART LIN break detection length is valid.
  * @param __LENGTH__ UART LIN break detection length.
  * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
  */
#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \
                                                     ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B))
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */

/**
  * @brief Ensure that UART request parameter is valid.
  * @param __PARAM__ UART request parameter.
  * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
  */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC)
#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST)     || \
                                              ((__PARAM__) == UART_SENDBREAK_REQUEST)    || \
                                              ((__PARAM__) == UART_MUTE_MODE_REQUEST)    || \
                                              ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \
                                              ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST))
#else
#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST)     || \
                                              ((__PARAM__) == UART_SENDBREAK_REQUEST)    || \
                                              ((__PARAM__) == UART_MUTE_MODE_REQUEST)    || \
                                              ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST))
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6)  && !defined(STM32F070xB)  && !defined(STM32F030xC) */

#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB)  && !defined(STM32F030xC)
/**
  * @brief Ensure that UART stop mode state is valid.
  * @param __STOPMODE__ UART stop mode state.
  * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid)
  */
#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
                                                   ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE))

/**
  * @brief Ensure that UART wake-up selection is valid.
  * @param __WAKE__ UART wake-up selection.
  * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid)
  */
#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \
                                            ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \
                                            ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY))
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @addtogroup UARTEx_Exported_Functions
  * @{
  */

/** @addtogroup UARTEx_Exported_Functions_Group1
  * @brief    Extended Initialization and Configuration Functions
  * @{
  */
/* Initialization and de-initialization functions  ****************************/
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime);
#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
  * @}
  */

/** @addtogroup UARTEx_Exported_Functions_Group2
  * @brief    Extended UART Interrupt handling function
  * @{
  */

/* IO operation functions  ***************************************************/
#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart);
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
  * @}
  */

/** @addtogroup UARTEx_Exported_Functions_Group3
  * @brief    Extended Peripheral Control functions
  * @{
  */

/* Peripheral Control functions  **********************************************/
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC)
HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
  * @}
  */
/* Peripheral State functions  ************************************************/

/**
  * @}
  */

/* Private functions ---------------------------------------------------------*/

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F0xx_HAL_UART_EX_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/