jmg
/
lora-irrigation
1
0
Fork 0
Code Issues 0 Pull Requests 0 Releases 0 Wiki Activity
Implement a secure ICS protocol targeting LoRa Node151 microcontroller for controlling irrigation.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
30 Commits
4 Branches
18 MiB
 
 
 
 
 
 
Branch: mbed-sx1276
Branches Tags
${ item.name }
Create branch ${ searchTerm }
from 'mbed-sx1276'
${ noResults }
lora-irrigation/stm32/l151ccux/stm32l1xx_hal_conf.h

336 lines
12 KiB
Raw Permalink Blame History 

  1. /**

  2.   ******************************************************************************

  3.   * @file    stm32l1xx_hal_conf.h

  4.   * @brief   HAL configuration file.

  5.   ******************************************************************************

  6.   * @attention

  7.   *

  8.   * <h2><center>&copy; COPYRIGHT(c) 2020 STMicroelectronics</center></h2>

  9.   *

  10.   * Redistribution and use in source and binary forms, with or without modification,

  11.   * are permitted provided that the following conditions are met:

  12.   *   1. Redistributions of source code must retain the above copyright notice,

  13.   *      this list of conditions and the following disclaimer.

  14.   *   2. Redistributions in binary form must reproduce the above copyright notice,

  15.   *      this list of conditions and the following disclaimer in the documentation

  16.   *      and/or other materials provided with the distribution.

  17.   *   3. Neither the name of STMicroelectronics nor the names of its contributors

  18.   *      may be used to endorse or promote products derived from this software

  19.   *      without specific prior written permission.

  20.   *

  21.   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

  22.   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

  23.   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

  24.   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

  25.   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

  26.   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

  27.   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

  28.   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

  29.   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

  30.   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  31.   *

  32.   ******************************************************************************

  33.   */

  34. 

  35. /* Define to prevent recursive inclusion -------------------------------------*/

  36. #ifndef __STM32L1xx_HAL_CONF_H

  37. #define __STM32L1xx_HAL_CONF_H

  38. 

  39. #ifdef __cplusplus

  40.  extern "C" {

  41. #endif

  42. 

  43. /* Exported types ------------------------------------------------------------*/

  44. /* Exported constants --------------------------------------------------------*/

  45. 

  46. /* ########################## Module Selection ############################## */

  47. /**

  48.   * @brief This is the list of modules to be used in the HAL driver

  49.   */

  50. 

  51. #define HAL_MODULE_ENABLED

  52. /*#define HAL_ADC_MODULE_ENABLED   */

  53. /*#define HAL_CRYP_MODULE_ENABLED   */

  54. /*#define HAL_COMP_MODULE_ENABLED   */

  55. /*#define HAL_CRC_MODULE_ENABLED   */

  56. /*#define HAL_CRYP_MODULE_ENABLED   */

  57. /*#define HAL_DAC_MODULE_ENABLED   */

  58. /*#define HAL_I2C_MODULE_ENABLED   */

  59. /*#define HAL_I2S_MODULE_ENABLED   */

  60. /*#define HAL_IRDA_MODULE_ENABLED   */

  61. /*#define HAL_IWDG_MODULE_ENABLED   */

  62. /*#define HAL_LCD_MODULE_ENABLED   */

  63. /*#define HAL_NOR_MODULE_ENABLED   */

  64. /*#define HAL_OPAMP_MODULE_ENABLED   */

  65. #define HAL_PCD_MODULE_ENABLED

  66. #define HAL_RTC_MODULE_ENABLED

  67. /*#define HAL_SD_MODULE_ENABLED   */

  68. /*#define HAL_SMARTCARD_MODULE_ENABLED   */

  69. #define HAL_SPI_MODULE_ENABLED

  70. /*#define HAL_SRAM_MODULE_ENABLED   */

  71. #define HAL_TIM_MODULE_ENABLED

  72. /*#define HAL_UART_MODULE_ENABLED   */

  73. /*#define HAL_USART_MODULE_ENABLED   */

  74. /*#define HAL_WWDG_MODULE_ENABLED   */

  75. /*#define HAL_EXTI_MODULE_ENABLED   */

  76. #define HAL_GPIO_MODULE_ENABLED

  77. #define HAL_DMA_MODULE_ENABLED

  78. #define HAL_RCC_MODULE_ENABLED

  79. #define HAL_FLASH_MODULE_ENABLED

  80. #define HAL_PWR_MODULE_ENABLED

  81. #define HAL_CORTEX_MODULE_ENABLED

  82. 

  83. /* ########################## Oscillator Values adaptation ####################*/

  84. /**

  85.   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.

  86.   *        This value is used by the RCC HAL module to compute the system frequency

  87.   *        (when HSE is used as system clock source, directly or through the PLL).

  88.   */

  89. #if !defined  (HSE_VALUE)

  90.   #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */

  91. #endif /* HSE_VALUE */

  92. 

  93. #if !defined  (HSE_STARTUP_TIMEOUT)

  94.   #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */

  95. #endif /* HSE_STARTUP_TIMEOUT */

  96. 

  97. /**

  98.   * @brief Internal Multiple Speed oscillator (MSI) default value.

  99.   *        This value is the default MSI range value after Reset.

  100.   */

  101. #if !defined  (MSI_VALUE)

  102.   #define MSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/

  103. #endif /* MSI_VALUE */

  104. /**

  105.   * @brief Internal High Speed oscillator (HSI) value.

  106.   *        This value is used by the RCC HAL module to compute the system frequency

  107.   *        (when HSI is used as system clock source, directly or through the PLL).

  108.   */

  109. #if !defined  (HSI_VALUE)

  110.   #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/

  111. #endif /* HSI_VALUE */

  112. 

  113. /**

  114.   * @brief Internal Low Speed oscillator (LSI) value.

  115.   */

  116. #if !defined  (LSI_VALUE)

  117.   #define LSI_VALUE    (37000U) /*!< LSI Typical Value in Hz*/

  118. #endif /* LSI_VALUE */          /*!< Value of the Internal Low Speed oscillator in Hz

  119.                                      The real value may vary depending on the variations

  120.                                      in voltage and temperature.*/

  121. 

  122. /**

  123.   * @brief External Low Speed oscillator (LSE) value.

  124.   *        This value is used by the UART, RTC HAL module to compute the system frequency

  125.   */

  126. #if !defined  (LSE_VALUE)

  127.   #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/

  128. #endif /* LSE_VALUE */

  129. 

  130. #if !defined  (LSE_STARTUP_TIMEOUT)

  131.   #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */

  132. #endif /* HSE_STARTUP_TIMEOUT */

  133. 

  134. /* Tip: To avoid modifying this file each time you need to use different HSE,

  135.    ===  you can define the HSE value in your toolchain compiler preprocessor. */

  136. 

  137. /* ########################### System Configuration ######################### */

  138. /**

  139.   * @brief This is the HAL system configuration section

  140.   */

  141. 

  142. #define  VDD_VALUE					  ((uint32_t)3300) /*!< Value of VDD in mv */

  143. #define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority */

  144. #define  USE_RTOS                     0

  145. #define  PREFETCH_ENABLE              0

  146. #define  INSTRUCTION_CACHE_ENABLE     1

  147. #define  DATA_CACHE_ENABLE            1

  148. 

  149. /* ########################## Assert Selection ############################## */

  150. /**

  151.   * @brief Uncomment the line below to expanse the "assert_param" macro in the

  152.   *        HAL drivers code

  153.   */

  154. /* #define USE_FULL_ASSERT    1U */

  155. 

  156. /* ################## Register callback feature configuration ############### */

  157. /**

  158.   * @brief Set below the peripheral configuration  to "1U" to add the support

  159.   *        of HAL callback registration/deregistration feature for the HAL

  160.   *        driver(s). This allows user application to provide specific callback

  161.   *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting

  162.   *        the default weak callback functions (see each stm32l0xx_hal_ppp.h file

  163.   *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef

  164.   *        for each PPP peripheral).

  165.   */

  166. #define USE_HAL_ADC_REGISTER_CALLBACKS        0U

  167. #define USE_HAL_COMP_REGISTER_CALLBACKS       0U

  168. #define USE_HAL_DAC_REGISTER_CALLBACKS        0U

  169. #define USE_HAL_I2C_REGISTER_CALLBACKS        0U

  170. #define USE_HAL_I2S_REGISTER_CALLBACKS        0U

  171. #define USE_HAL_IRDA_REGISTER_CALLBACKS       0U

  172. #define USE_HAL_OPAMP_REGISTER_CALLBACKS      0U

  173. #define USE_HAL_PCD_REGISTER_CALLBACKS        0U

  174. #define USE_HAL_RTC_REGISTER_CALLBACKS        0U

  175. #define USE_HAL_SDMMC_REGISTER_CALLBACKS      0U

  176. #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U

  177. #define USE_HAL_SPI_REGISTER_CALLBACKS        0U

  178. #define USE_HAL_TIM_REGISTER_CALLBACKS        0U

  179. #define USE_HAL_UART_REGISTER_CALLBACKS       0U

  180. #define USE_HAL_USART_REGISTER_CALLBACKS      0U

  181. #define USE_HAL_WWDG_REGISTER_CALLBACKS       0U

  182. 

  183. /* ################## SPI peripheral configuration ########################## */

  184. 

  185. /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver

  186.  * Activated: CRC code is present inside driver

  187.  * Deactivated: CRC code cleaned from driver

  188.  */

  189. 

  190. #define USE_SPI_CRC                   0U

  191. /* Includes ------------------------------------------------------------------*/

  192. /**

  193.   * @brief Include module's header file

  194.   */

  195. 

  196. #ifdef HAL_RCC_MODULE_ENABLED

  197.  #include "stm32l1xx_hal_rcc.h"

  198. #endif /* HAL_RCC_MODULE_ENABLED */

  199. 

  200. #ifdef HAL_GPIO_MODULE_ENABLED

  201.  #include "stm32l1xx_hal_gpio.h"

  202. #endif /* HAL_GPIO_MODULE_ENABLED */

  203. 

  204. #ifdef HAL_DMA_MODULE_ENABLED

  205.   #include "stm32l1xx_hal_dma.h"

  206. #endif /* HAL_DMA_MODULE_ENABLED */

  207. 

  208. #ifdef HAL_CORTEX_MODULE_ENABLED

  209.  #include "stm32l1xx_hal_cortex.h"

  210. #endif /* HAL_CORTEX_MODULE_ENABLED */

  211. 

  212. #ifdef HAL_ADC_MODULE_ENABLED

  213.  #include "stm32l1xx_hal_adc.h"

  214. #endif /* HAL_ADC_MODULE_ENABLED */

  215. 

  216. #ifdef HAL_COMP_MODULE_ENABLED

  217.   #include "stm32l1xx_hal_comp.h"

  218. #endif /* HAL_COMP_MODULE_ENABLED */

  219. 

  220. #ifdef HAL_CRC_MODULE_ENABLED

  221.  #include "stm32l1xx_hal_crc.h"

  222. #endif /* HAL_CRC_MODULE_ENABLED */

  223. 

  224. #ifdef HAL_CRYP_MODULE_ENABLED

  225.  #include "stm32l1xx_hal_cryp.h"

  226. #endif /* HAL_CRYP_MODULE_ENABLED */

  227. 

  228. #ifdef HAL_DAC_MODULE_ENABLED

  229.  #include "stm32l1xx_hal_dac.h"

  230. #endif /* HAL_DAC_MODULE_ENABLED */

  231. 

  232. #ifdef HAL_FLASH_MODULE_ENABLED

  233.  #include "stm32l1xx_hal_flash.h"

  234. #endif /* HAL_FLASH_MODULE_ENABLED */

  235. 

  236. #ifdef HAL_SRAM_MODULE_ENABLED

  237.  #include "stm32l1xx_hal_sram.h"

  238. #endif /* HAL_SRAM_MODULE_ENABLED */

  239. 

  240. #ifdef HAL_NOR_MODULE_ENABLED

  241.  #include "stm32l1xx_hal_nor.h"

  242. #endif /* HAL_NOR_MODULE_ENABLED */

  243. 

  244. #ifdef HAL_I2C_MODULE_ENABLED

  245.  #include "stm32l1xx_hal_i2c.h"

  246. #endif /* HAL_I2C_MODULE_ENABLED */

  247. 

  248. #ifdef HAL_I2S_MODULE_ENABLED

  249.  #include "stm32l1xx_hal_i2s.h"

  250. #endif /* HAL_I2S_MODULE_ENABLED */

  251. 

  252. #ifdef HAL_IWDG_MODULE_ENABLED

  253.  #include "stm32l1xx_hal_iwdg.h"

  254. #endif /* HAL_IWDG_MODULE_ENABLED */

  255. 

  256. #ifdef HAL_LCD_MODULE_ENABLED

  257.  #include "stm32l1xx_hal_lcd.h"

  258. #endif /* HAL_LCD_MODULE_ENABLED */

  259. 

  260. #ifdef HAL_OPAMP_MODULE_ENABLED

  261.  #include "stm32l1xx_hal_opamp.h"

  262. #endif /* HAL_OPAMP_MODULE_ENABLED */

  263. 

  264. #ifdef HAL_PWR_MODULE_ENABLED

  265.  #include "stm32l1xx_hal_pwr.h"

  266. #endif /* HAL_PWR_MODULE_ENABLED */

  267. 

  268. #ifdef HAL_RTC_MODULE_ENABLED

  269.  #include "stm32l1xx_hal_rtc.h"

  270. #endif /* HAL_RTC_MODULE_ENABLED */

  271. 

  272. #ifdef HAL_SD_MODULE_ENABLED

  273.  #include "stm32l1xx_hal_sd.h"

  274. #endif /* HAL_SD_MODULE_ENABLED */

  275. 

  276. #ifdef HAL_SPI_MODULE_ENABLED

  277.  #include "stm32l1xx_hal_spi.h"

  278. #endif /* HAL_SPI_MODULE_ENABLED */

  279. 

  280. #ifdef HAL_TIM_MODULE_ENABLED

  281.  #include "stm32l1xx_hal_tim.h"

  282. #endif /* HAL_TIM_MODULE_ENABLED */

  283. 

  284. #ifdef HAL_UART_MODULE_ENABLED

  285.  #include "stm32l1xx_hal_uart.h"

  286. #endif /* HAL_UART_MODULE_ENABLED */

  287. 

  288. #ifdef HAL_USART_MODULE_ENABLED

  289.  #include "stm32l1xx_hal_usart.h"

  290. #endif /* HAL_USART_MODULE_ENABLED */

  291. 

  292. #ifdef HAL_IRDA_MODULE_ENABLED

  293.  #include "stm32l1xx_hal_irda.h"

  294. #endif /* HAL_IRDA_MODULE_ENABLED */

  295. 

  296. #ifdef HAL_SMARTCARD_MODULE_ENABLED

  297.  #include "stm32l1xx_hal_smartcard.h"

  298. #endif /* HAL_SMARTCARD_MODULE_ENABLED */

  299. 

  300. #ifdef HAL_WWDG_MODULE_ENABLED

  301.  #include "stm32l1xx_hal_wwdg.h"

  302. #endif /* HAL_WWDG_MODULE_ENABLED */

  303. 

  304. #ifdef HAL_PCD_MODULE_ENABLED

  305.  #include "stm32l1xx_hal_pcd.h"

  306. #endif /* HAL_PCD_MODULE_ENABLED */

  307. 

  308. #ifdef HAL_EXTI_MODULE_ENABLED

  309.  #include "stm32l1xx_hal_exti.h"

  310. #endif /* HAL_EXTI_MODULE_ENABLED */

  311. 

  312. /* Exported macro ------------------------------------------------------------*/

  313. #ifdef  USE_FULL_ASSERT

  314. /**

  315.   * @brief  The assert_param macro is used for function's parameters check.

  316.   * @param  expr: If expr is false, it calls assert_failed function

  317.   *         which reports the name of the source file and the source

  318.   *         line number of the call that failed.

  319.   *         If expr is true, it returns no value.

  320.   * @retval None

  321.   */

  322.   #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))

  323. /* Exported functions ------------------------------------------------------- */

  324.   void assert_failed(uint8_t* file, uint32_t line);

  325. #else

  326.   #define assert_param(expr) ((void)0U)

  327. #endif /* USE_FULL_ASSERT */

  328. 

  329. #ifdef __cplusplus

  330. }

  331. #endif

  332. 

  333. #endif /* __STM32L1xx_HAL_CONF_H */

  334. 

  335. /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/