SRCS.NODE151+= board.c
SRCS.NODE151+= misc.c

ARMOBJDUMP?= arm-none-eabi-objdump
ARMCC?= arm-none-eabi-gcc

# Clang doesn't work due to no-nano libc
#ARMCC?=clang-mp-9.0
#ARMTARGET?= -nostdlib -ffreestanding -target arm-none-eabi -mcpu=cortex-m3 -mfloat-abi=soft  -mthumb

.include <$(.PARSEDIR)/mu.opts.mk>

# Strobe
.if ${MK_STROBE} == "yes"
.PATH: $(.CURDIR)/strobe
CFLAGS+= -I$(.CURDIR)/strobe -DSTROBE_SINGLE_THREAD=1
STROBE_SRCS+= strobe.c \
	x25519.c
.endif

# LoRamac (SX1276) radio code
.if ${MK_SX1276} == "yes"
LORAMAC_SRC = $(.CURDIR)/loramac/src
.PATH: $(LORAMAC_SRC)/radio/sx1276 $(LORAMAC_SRC)/system $(LORAMAC_SRC)/boards/mcu $(LORAMAC_SRC)/boards/NucleoL152
CFLAGS+= -I$(LORAMAC_SRC)/boards
CFLAGS+= -I$(LORAMAC_SRC)/system
CFLAGS+= -I$(LORAMAC_SRC)/radio
CFLAGS+= -DUSE_HAL_DRIVER -DSX1276MB1LAS
SRCS+= sx1276.c
SRCS+= utilities.c
SRCS+= adc.c timer.c delay.c gpio.c uart.c fifo.c
SRCS+= adc-board.c delay-board.c gpio-board.c rtc-board.c lpm-board.c sx1276mb1las-board.c spi-board.c uart-board.c
.endif

# NODE151 Microcontroller
.if ${MK_NODE151} == "yes"
ARMTARGET?= -mcpu=cortex-m3 -mthumb
STM32=$(.CURDIR)/stm32
.PATH: $(STM32)/l151ccux
LINKER_SCRIPT=$(STM32)/l151ccux/STM32L151CCUX_FLASH.ld
SRCS+=				\
	startup_stm32l151ccux.s	\
	stm32l1xx_hal.c		\
	stm32l1xx_hal_adc.c	\
	stm32l1xx_hal_adc_ex.c	\
	stm32l1xx_hal_cortex.c	\
	stm32l1xx_hal_dma.c	\
	stm32l1xx_hal_flash.c \
	stm32l1xx_hal_flash_ex.c \
	stm32l1xx_hal_gpio.c	\
	stm32l1xx_hal_pcd.c	\
	stm32l1xx_hal_pcd_ex.c	\
	stm32l1xx_hal_pwr.c	\
	stm32l1xx_hal_pwr_ex.c	\
	stm32l1xx_hal_rcc.c	\
	stm32l1xx_hal_rcc_ex.c	\
	stm32l1xx_hal_rtc.c	\
	stm32l1xx_hal_rtc_ex.c	\
	stm32l1xx_hal_spi.c	\
	stm32l1xx_hal_uart.c	\
	system_stm32l1xx.c

SRCS+=				\
	stm32l1xx_it.c		\
	stm32l1xx_hal_msp.c

CFLAGS+= -I$(STM32)
CFLAGS+= -I$(STM32)/l151ccux
CFLAGS+= -DSTM32L151xC
.endif

# USB CDC
.if ${MK_USB_CDC} == "yes"
.PATH: $(STM32)/usb
SRCS+=				\
	usb_device.c		\
	usbd_cdc.c		\
	usbd_cdc_if.c		\
	usbd_conf.c		\
	usbd_core.c		\
	usbd_ctlreq.c		\
	usbd_desc.c		\
	usbd_ioreq.c

CFLAGS+= -I$(STM32)/usb
.endif

.if ${MK_USB_CDC} == "yes" && ${MK_NODE151} == "yes"
SRCS+=				\
	stm32l1xx_ll_usb.c
.endif