Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
gmultipath.8: Add HISTORY
Adjust sentences with bad phrases picked up by igor
ggatec.8: Add HISTORY
ggated.8: Add HISTORY
ggatel.8: Add HISTORY
Seperate out sentence as advised by igor.
hastctl.8: Add HISTORY
hastd.8: Add HISTORY
Fix sentence highlighted by igor.
iscontrol.8: Add HISTORY
mdmfs.8: Add HISTORY
Address issues raised by igor
mount_nfs.8: Add HISTORY
Not sure where mount_nfs first showed up, but the verison used
in the BSD's originates from 4.4BSD according to CSRG archive.
Though commercial offerings from Sun and others covers older
systems, eg https://groups.google.com/forum/#!topic/net.unix-wizards/lMe7aQikqJI
nandfs.8: Add HISTORY
Adjust sentence in description to address bad phrase highlighted
by igor.
nvmecontrol.8: Add HISTORY
PR: 212491
PR: 212498
PR: 212499
PR: 212500
PR: 212501
PR: 212502
PR: 212505
PR: 212508
PR: 212540
PR: 212543
PR: 212546
Submitted by: Sevan Janiyan <venture37@geeklan.co.uk>
Unbreak ggatec and ggatel on i386 after r238119, which added two more
'struct g_gate_ctl_create' fields.
While the behaviour was technically undefined on other architectures
as well, on the reporter's amd64 systems the uninitialized bytes the
kernel cares about were always zero so everything worked as expected.
PR: 197309, 199559
Submitted by: ota@j.email.ne.jp, Fabian Keil
Reviewed by: pjd
Approved by: re (gjb)
'struct g_gate_ctl_create' fields.
While the behaviour was technically undefined on other architectures
as well, on the reporter's amd64 systems the uninitialized bytes the
kernel cares about were always zero so everything worked as expected.
PR: 197309, 199559
Submitted by: ota@j.email.ne.jp, Fabian Keil
Reviewed by: pjd
MFC after: 1 week
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
This self-written compiler warning, which is hopefully going to be
committed into LLVM sources soon, warns about potentially missing
`static' keywords, similar to -Wmissing-prototypes.
- bin/pax: Move external declaration of chdname and s_mask into extern.h.
- bin/setfacl: Move setfacl.c-specific stuff out of setfacl.h.
- sbin/mount_fusefs: Remove char *progname; use getprogname().
- others: add `static' where possible.
r204076:
Please welcome HAST - Highly Avalable Storage.
HAST allows to transparently store data on two physically separated machines
connected over the TCP/IP network. HAST works in Primary-Secondary
(Master-Backup, Master-Slave) configuration, which means that only one of the
cluster nodes can be active at any given time. Only Primary node is able to
handle I/O requests to HAST-managed devices. Currently HAST is limited to two
cluster nodes in total.
HAST operates on block level - it provides disk-like devices in /dev/hast/
directory for use by file systems and/or applications. Working on block level
makes it transparent for file systems and applications. There in no difference
between using HAST-provided device and raw disk, partition, etc. All of them
are just regular GEOM providers in FreeBSD.
For more information please consult hastd(8), hastctl(8) and hast.conf(5)
manual pages, as well as http://wiki.FreeBSD.org/HAST.
Sponsored by: FreeBSD Foundation
Sponsored by: OMCnet Internet Service GmbH
Sponsored by: TransIP BV
r204077:
Remove some lines left over by accident.
r204083:
Add missing KEYWORD line.
Pointed out by: dougb
r205279 sys:
Simplify loops.
HAST allows to transparently store data on two physically separated machines
connected over the TCP/IP network. HAST works in Primary-Secondary
(Master-Backup, Master-Slave) configuration, which means that only one of the
cluster nodes can be active at any given time. Only Primary node is able to
handle I/O requests to HAST-managed devices. Currently HAST is limited to two
cluster nodes in total.
HAST operates on block level - it provides disk-like devices in /dev/hast/
directory for use by file systems and/or applications. Working on block level
makes it transparent for file systems and applications. There in no difference
between using HAST-provided device and raw disk, partition, etc. All of them
are just regular GEOM providers in FreeBSD.
For more information please consult hastd(8), hastctl(8) and hast.conf(5)
manual pages, as well as http://wiki.FreeBSD.org/HAST.
Sponsored by: FreeBSD Foundation
Sponsored by: OMCnet Internet Service GmbH
Sponsored by: TransIP BV
Change communication protocol to be much more resistant on network
problems and to allow for much better performance.
Better performance is achieved by creating two connections between
ggatec and ggated one for sending the data and one for receiving it.
Every connection is handled by separeted thread, so there is no more
synchronous data flow (send and wait for response), now one threads
sends all requests and another receives the data.
Use two threads in ggatec(8):
- sendtd, which takes I/O requests from the kernel and sends them to the
ggated daemon on the other end;
- recvtd, which waits for ggated responses and forwards them to the kernel.
Use three threads in ggated(8):
- recvtd, which waits for I/O requests and puts them onto incoming queue;
- disktd, which takes requests from the incoming queue, does disk operations
and puts finished requests onto outgoing queue;
- sendtd, which takes finished requests from the outgoing queue and sends
responses back to ggatec.
Because there were major changes in communication protocol, there is no
backward compatibility, from now on, both client and server has to run
on 5.x or 6.x (or at least ggated should be from the same FreeBSD version
on which ggatec is running).
For Gbit networks some buffers need to be increased. I use those settings:
kern.ipc.maxsockbuf=16777216
net.inet.tcp.sendspace=8388608
net.inet.tcp.recvspace=8388608
and I use '-S 4194304 -R 4194304' options for both, ggatec and ggated.
Approved by: re (scottl)
This little thing can cause a deadlock, because taste mechanism start
to work after creation of ggate provider and I/O requests are sent from
other classes from the g_event thread, so number of pending events isn't 0.
Now ggatec(8) start second handshake and ggated(8) is trying to open
GEOM provider (for example md(4)) and it can't, because it hangs on
g_waitidle() in g_dev_open(). g_waitidle() cannot finish because
there is a pending read on event queue, and this read can't be
finished, because ggated(8) can't open target device.
GEOM Gate will recover from this deadlock, because requests will
timeout, but it of course isn't the best solution and I don't know
better one for now, so we should avoid opening GEOM providers while
there are pending requests in event queue.
John-Mark Gurney
pfg
bdrewery
ngie
allanjude
ak
grehan
brueffer
sjg
wblock
bapt
gjb
ed
marcel
jamie
pjd
delphij
dfr
lulf
ru
trhodes